Acoustic Systems

Acoustic System manufactures five different resonators, in five different materials. Every music system can be improved by using one or more of them in six easy steps.

The resonators are activated by sound waves in the room and produce overtones – subtle overtones, which also define the sound color. This coloring is often lost during the recording process, and when replaced always improves, and never worsens, the sound experience. Every listening room affects the music with its own specific audio characteristics, and from this point of view it can be said that the resonators by Acoustic System simply modify the acoustic properties of the listening room. In a very sophisticated way, of course.

Also of importance is the well seasoned wood employed in the manufacture of the pedestals. As in the case of musical instruments it is the skilled combination of materials which leads to perfection, and depending on the type of resonator metal, a harder or softer variety of maple is used for the base.The resonator elements are fixed to walls or furniture using a permanently elastic material, which allows residue-free removal from practically all surfaces. Bases can also be finished to customer specifications.

First stage = fixed driver with maximum tension on the cabinet, let all drivers produce maximum air pressure (energy) inside enclosureSecond stage = use nature material (woods), breaking resonance material in use must be opposite to the driver’s material breaking resonance, so is free for use any good performance driver(s) to reach resonance frequencies we want . By placing these material at strategy point(s), they cancel the standing wave created by air pressure produced from drivers, and the density of material converse part of pressure into tension. This tension is very useful to equalize the pressure inside the mid & high driver’s compartments.

Third stage = open some small ports (few mm) on & behind the cabinet to evacuate excess pressure. The precision of these ports are +/- half mm.

Advantage of this technology avoids using damping technique, any kind of (including air flow) damping technique will cause lost of harmonics & frequencies roll off, unwanted resonance etc. Tension/pressure conversion technique offer a well control enclosure, large frequencies extension produced by electronic system . Energy is completely recycled. So the speakers have no compression, no stress, and never aggressive. Give listener(s) maximum musical listening enjoyment.